top of page
Step 2
Peel film from the back of the self adhesive corner and adhere it to the wall.
Note: If you are fitting thin tiles (i.e. glass mosaics) you may want to reduce the
width of the adhesive strips by using a safety blade or scissors.
Step 3
Use roller to make sure internal waterproof corner is securely adhered in place.
Step 4
Measure the lengths of self adhesive tape required using a tape measure, then cut from the roll accordingly using a safety blade or scissors.
Note: The lengths of tape should overlap the internal corners by 20mm approx when in position.
Step 5
Peel film from 10mm section of self adhesive tape and stick to top of acrylic shower tray/bath.
Step 6
Peel film from the back of the self adhesive tape and adhere tape to the wall.
Step 7
Use roller to make sure tape is adhered securely to the wall.
Step 8
Follow previous 3 steps around all other areas of tray/bath with the remainder of the sealing kit.
You now have a fully waterproof tray/bath with no leaks to worry about!
bottom of page